How to Increase Air Compressor CFM?

Sometimes you have to increase the CFM on your air compressor, depending on where you’re using it to ensure your tools run efficiently. If the compressor fails to meet your needs, you can try to boost its performance. I will guide you step by step with proven method.

Different tools require different CFM levels. For example, a nail gun might need a low CFM, while a sandblaster demands a much higher one. Without adequate CFM, your tools won’t function properly.

How CFM Effects Air Tools & Applications?

Higher CFM is important for the smooth process of air compressor such as paint sprayers & grinders, as it provides the consistent airflow needed for best performance. When the airflow is insufficient, tools may operate unpredictably or fail to function altogether, which can lead to inconsistent performance or complete shutdowns

Air Compressor CFM Factors

• Size & Capacity: Small compressors normally produce low CFM, Large and high-capacity compressors provide higher outputs.
• PSI & CFM: CFM and PSI (Pounds per Square Inch) are inter-connected. When PSI pressure increases, CFM will decrease also when CFM will increase, PSI will decrease.
• Environmental Factors: Higher altitudes and extreme temperatures can reduce a compressor’s efficiency, so affecting its CFM.

Top Steps to Increase Air Compressor CFM

• Company’s Guidelines: Always check the compressor manufacture guidebook. Some units have specific recommendations for optimizing performance.

Reduce Pressure to Increase CFM:

• Adjusting the Regulator Settings: By lowering the PSI, you allow the compressor to produce more CFM. Use the regulator to find the optimal balance.
• Increase CFM with PSI: Reducing PSI slightly can significantly boost CFM without compromising tool functionality.

Use a Second Air Compressor

• Parallel Setup for Higher Output: Linking two compressors in parallel combines their airflow capacities, giving you a higher overall CFM.

Optimize the Air Intake

• High Flow intake Filter: A high-flow intake filter will minimize conflict, also it allows your compressor to draw in more air.
• Clean & Maintain the Valves: Dirty intake valves restrict airflow. Regular cleaning ensures maximum efficiency.
• Add Extra Air Receiver Tank: Adding a tank provides a buffer, storing extra air and delivering it when needed, effectively increasing the apparent CFM.
• Upgrade to a Larger Compressor Pump: A larger pump can move more air, directly increasing CFM.
• Use Multiple Compressors Strategically: Setting up multiple compressors to work together can meet even the most demanding airflow requirements.

Tips for Efficient Air Compressor Usage

1. Regular Maintenance

Cleaning Filters & Valves

Dirty filters obstruct performance. Clean them frequently for optimal airflow.

Checking for Leaks

Leaks in hoses or fittings can drastically reduce CFM. Inspect and repair them promptly.

Right Compressor for Your Needs

Select a compressor with a CFM rating suited to your tools and applications.

2. Common Mistakes should to Avoid

Ignoring Maintenance Needs:

Skipping regular checks leads to reduced efficiency and unexpected failures.

Overloading the Compressor:

Running tools that exceed your compressor’s CFM rating strains the system and causes wear.

Using Mismatched Tools:

Ensure your tools’ requirements align with your compressor’s capabilities.

Conclusion

It’s not difficult to increase the CFM of your air compressor. You can make sure your tools operate effectively and consistently by implementing these procedures, such as adding tanks, lowering pressure, and maintaining your equipment.

FAQs